Lithium Battery (Lipo/Life/Lilon/Lihv) Program; Charging Lithium Battery At Balance Mode - H-Speed Herakles Mini Bedienungsanleitung

LITHIUM BATTERY (LiPo/LiFe/LiIon/LiHV) PROGRAM
These programs are only suitable for charging and discharging lithium batteries
with a nominal voltage of 3.7V, 3.3V, 3.6V and 3.8V per cell.
These batteries need to adopt different charge technique which is termed as cons-
tant voltage(CV) and constant current(CC) method. The charge current varies ac-
cording to the battery capacity and performance.
The final voltage of charge process is also very important; it should be precisely
matched with the charge voltage of the battery. They are 4.2V for LiPo, 3.6V for
LiFe, 4.1V for Lilon and 4.35V for LiHV. The charge current and nominal voltage
as for cell count set on the charge program must always be correct for the battery
to be charged.

CHARGING LITHIUM BATTERY AT BALANCE MODE

This function is for balancing the voltage of lithium-polymer battery cells while
charging.
In the balance mode, the battery needs to connect to the battery's power lead with
balance wire.
In this mode the charging process will be different from ordinary charging mode.
The internal processor of the charger will monitor the voltages of each cell of the
battery pack and control charging current which is feeding to each cell to equalize
the voltage.
Note: We recommend charging lithium batteries with a balance wire in the balance
mode only.
The left side of the first line shows the type of
battery you choose. The value on the left of the
second line of the charger is current the user
sets. After setting the current and voltage,
press the START/ENTER button for more than
3 seconds to start the process.
> 3 seconds
37 EN