H-Speed Herakles Mini Bedienungsanleitung Seite 30

WARNINGS AND SAFETY NOTES
• ALWAYS make certain to observe proper input and output polarity. The
HERAKLES MINI operates safely with input voltage between AC 100-120V.
• ALWAYS place the charger on a heat-resistant, non-flammable surface
when in use. Keep flammable materials away from charger when in use.
• NEVER use the charger while placed on automobile seats, carpeting or
other flammable materials.
• ALWAYS make sure that the vent holes on the bottom of the charger are
unobstructed and the cooling fan is in operation.
• ALWAYS fully read all warnings and instructions of both charger and
battery prior to use. Be aware of battery safety warnings. Make sure that
all charging parameters are correctly setup prior to charging any battery.
• ALWAYS press the roller wheel to terminate charge completely when bat-
tery is fully charged, and return to the standby screen on the LCD display.
STANDARD BATTERY PARAMETERS
Rated Voltage
Full Charge Voltage
Storage Voltage
Discharge Voltage
Pre-charge Voltage
Balance Charge
Unbalanced Charge
Support Cells
Max Charge Current
Be EXTREMELY careful to choose the correct voltage settings based on the cells
and chemistry of the battery being charged. Failure to do so may result in battery
damage, explosion, or fire!
NiCd/NiMH Pb
1.20V 2.0V
1.4V 2.4V
- -
0.5-1.10V 1.8-2.0V
- 2.0V
- -
✓ ✓
1-16s 1-12s
16A 16A
LiFe Lilon
3.2V 3.6V
3.6V 4.1V
3.3V 3.7V
2.6-2.9V 2.9-3.2V
2.9V 3.1V
✓ ✓
✓ ✓
1-6s 1-6s
16A 16A
31
LiPo LiHV
3.7V 3.8V
4.2V 4.35V
3.8V 3.9V
3.0-3.30V 3.1-3.4V
3.2V 3.2V
✓ ✓
✓ ✓
1-6s 1-6s
16A 16A
EN