Charging Nimh/Nicd Battery In Re-Peak Charge Mode; Discharging Of Nimh/Nicd Battery - H-Speed Herakles Mini Bedienungsanleitung

NIMH/NICD BATTERY PROGRAM
Elapsed
Battery
time
Charge
type
current

CHARGING NIMH/NICD BATTERY IN RE-PEAK CHARGE MODE

Re-peak Charge Mode (NiMH and NiCd batteries only): In re-peak charge mode,
the charger can peak charge the battery once, twice or three times in a row auto-
matically. This is good for confirming the battery is fully charged, and for checking
how well the battery receives fast charges. A five minutes cool-off delay occurs
after each re-peak charge. Press START/ENTER button more than 3 seconds to
start the charging.
Elapsed
Battery
time
type
Charge
current

DISCHARGING OF NIMH/NICD BATTERY

Battery
type
EN
Battery
voltage
Charged
capacity
Charged
capacity
Battery
voltage
> 3 seconds
The screen displays real-time charging status.
Press BATT TYPE/STOP button to stop the
process.
The audible sound indicates the end of
process.
Re-peak cycle number 1 shows on the display.
Press the START/ENTER button to make the re-
peak cycle number blink and press INC. or DEC.
button to find the desired number of times to
re-peak charge the battery.
Press the START/ENTER button to confirm
selection.
Set discharge current on the left and final volta-
ge on the right.
Range of the discharge current is 0.1-2.0A;
range of final voltage is 0.1-15.0V.
Press START/ENTER button for more than
3 seconds to start the program.
44