Battery Internal Resistance - H-Speed Herakles Mini Bedienungsanleitung

BATTERY INTERNAL RESISTANCE

The user can check the battery internal resistance, including battery pack total
internal resistance and each cell internal resistance.
Enter into
button, the charger will go into the internal resistance program.
1.Check the battery pack total internal resistance: Only need to connect the battery
to the main port of the charger. If you do not connect the battery to the charger or
the battery is defective, below message will appear:
Otherwise, normally, below message will appear:
2.Check the battery each cell internal resistance: connect the battery to both the
balance socket and the main port of the charger, normally, below message will
appear:
The fully flow chart is as below:
page, then press the „START/ENTER"
No Battery
Battery
connected
49
No Balance connected
Balance
connected
EN