Pb Battery Program; Charging & Discharging Of Pb Battery - H-Speed Herakles Mini Bedienungsanleitung

PB BATTERY PROGRAM

This program is only suitable for charging Pb lead-acid battery with nominal
voltage from 6 to 12V, Pb lead-acid battery is completely different from NiMH/
NiCd battery. These batteries can only deliver current lower in comparison to their
capacity. The same restriction applies to the charging process consequently, the
optimum charge current can only be 1/10 of the capacity. Pb battery can not be
used for fast-charging. Please follow the instructions provided by the battery
manufacturer.
CHARGING OF PB BATTERY
Batt type
Stop
Elapsed
Battery
time
type
Charge
current
DISCHARGING OF PB BATTERY
Batt type
Stop
EN
> 3 seconds
Charged
Battery
capacity
voltage
> 3 seconds
Set up the charge current on the left and nomi-
nal voltage on the right. Range of current 0.1-
6.0A, the voltage should match the battery being
charged. Press START/ENTER button for more
than 3 seconds to start charging.
The screen display the real-time charging
status. Press START/ENTER button again to
store the parameter value you set. Press BATT
TYPE/STOP button to end the program.
Set up the discharge current on the left and
nominal voltage on the right. Range of dis-
charge current is 0.1-2.0A, the voltage should
match the battery being discharged. Press
ENTER/START button for more than 3 seconds
to start discharging.
42