BestMatic SBS-126287.2 Bedienungsanleitung Seite 9

push the appliance gently to move it.
FIRST USE
Adjust the feet and clear the outside and inside of the refrigerator with warm cloth.
Remove the film: There is a layer of transparent film on the panel of our product, which can protect products
from being scratched in the process of production and transportation, and you can choose to reserve or remove
the film as needed.
Do not start the refrigerator immediately after vertical placement. Only start it after 2-6 hours standing to ensure
its proper operation.
To prevent damage to the power cord and any consequence incidents, the power cord should be not covered
by the refrigerator or other objects. Before switching on the refrigerator, please check the voltage range of
refrigerator carefully if the same as that of the power supply.
When the refrigerator is first installed, allow it stabilize at normal operating temperatures for 2-3 hours prior to
filling it with fresh or frozen foods.
If operation is interrupted, wait for 5 minutes before restarting.
DISPLAY CONTROLS
Use your appliance according to the following control regulations, your appliance has the corresponding
functions and modes as the control panels showed in the pictures below.
1. Freezer compartment temperature control button
2. Fridge compartment temperature control button
3. Feature button
4. Lock button
5. Lock icon
6. Temperature display for freezer compartment
7. Temperature display for fridge compartment
8. Super cool mode indicator light
9. Super freeze mode indicator light
10. Holiday mode indicator light
11. Child lock icon for water dispenser (no function)
Controlling the temperature
The default temperature for the refrigerator is set to 5°C and the freezer to -18°C. If you want to change the
temperature, follow the instructions below.
Caution! When you set a temperature, you set an average temperature for the whole refrigerator cabinet.
Temperatures inside each compartment may vary from the temperature values displayed on the panel,
depending on how much food you store and where you place them. Ambient temperature may also affect the
actual temperature inside the appliance.
Note: the temperature will impact the storage time of food. Set the temperature as necessary. Warmer will
accelerate food spoilage and colder will froze food bad. Thus, food to be wasted.
1. Lock /unlock
Press "Lock" button for 3 seconds, icon " " will be off and the panel is unlocked.
Without any operation in 20 seconds, the panel will be locked automatically.
If the appliance is in lock mode, the other buttons on the control panel will not function. When the buttons are
touched, a chime will sound and the lock icon will flash.
- 8 -