BestMatic SBS-126287.2 Bedienungsanleitung Seite 15

1) Align the sealed part with the hole in the door and place it in it.
2) It will be completed when the step of sealed part can be fitted to the step in the hole.
2. Rotate counterclockwise to remove the water valve assembly from the water tank for cleaning.
3. Remove the water tank cover. The tank and its cover can be cleaned after disassembly.
4. Install the water valve by rotating it clockwise after cleaning. When installing the tank cover, install the one
side at first (do not press it all the way), then install the other side. Press firmly on edges of the tank cover
to fit the tank. Re-install the entire water tank assembly at 45° to the door. Press the outer edge of the
water tank slightly downwards to make it fit into the door.
Fill the tank with pure drink water
Open the inlet cover ① of water tank. Slowly fill the tank with pure drinking water up to the maximum fill line
marked with "2L". Then close the inlet cover. To prevent any spills, please use a narrow-bore container to charge
water. Note: Only direct drinking water or mineral water can be stored in the water tank.
TECHNICAL SPECIFICATIONS
Rated voltage:
Rated current:
cire
Rated frequency:
Defrost power input:
Climate class:
Refrigerant:
Protection against electrical shock:
Insulation blowing gas:
Climate class:
- Extended temperate (SN): 'this refrigerating appliance is intended to be used at ambient temperatures
ranging from 10°C to 32 °C';
- Temperate(N): 'this refrigerating appliance is intended to be used at ambient temperatures ranging from
16 °C to 32 °C';
- Subtropical (ST): 'this refrigerating appliance is intended to be used at ambient temperatures ranging from
16 °C to 38 °C';
- Tropical(T): 'this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C
to 43 °C';
Note: More data information, please scan the QR code on the energy label.
NORMAL PHENOMENA
1. Button failure:
please check the control panel whether the fridge under lock mode. When under lock mode, all buttons
cannot work.
2. Long time to start:
When the ambient temperature is too high, it will take long time to start the appliance.
220-240V~
1.1A
50Hz
210W
SN-ST
R600a(75g)
I
CYCLOPENTANE
- 14 -