Yamaha CDC600B Bedienungsanleitung Seite 9

Remote control
1 Infrared signal transmitter
Sends infrared signals to this unit.
2 STANDBY/ON
Turns this unit on or to the standby mode while
(Power) on the front panel is pressed inward to the ON
position.
Note
You can operate this unit only when the
panel is pressed inward to the ON position.
3 CD/USB
Switches between CD mode and iPod/USB mode (see
page 9).
y
This setting is retained even if you turn off this unit.
4 PROGRAM
Turns on or off the program playback mode. See
"Program playback" on page 8.
5 DIMMER
Each time you press DIMMER, the brightness level
changes by 4 levels.
y
This setting is retained even if you turn off this unit.
6 Numeric buttons
Use to select directly a track on the disc or a file in the
current folder.
7
Searches tracks backward/forward while the button is
pressed.
8
9 FOLDER
Data Disc
Refer to page 9 for details.
0 DISC SKIP
Skips to the previous/next disc.
A MODE
Switches the disc play mode between 1DISC mode and
5DISC mode.
In 1DISC mode, only the selected disc is played back.
In 5DISC mode, all discs on the tray are played back in
sequence.
B OPEN/CLOSE
Opens or closes the disc tray. You can load or replace five
discs at a time. See page 8 for details.
C PURE DIRECT
Turns on or off the PURE DIRECT mode to improve
audio quality. See page 2 for details.
y
This setting is retained even if you turn off this unit.
D RANDOM
Turns on or off the random sequence playback mode.
(Power) on the front
Note
The random playback mode is canceled when the disc is ejected.
CONTROLS AND FUNCTIONS
(Search backward),
forward)
(Skip backward),
: Skips to the next track.
: Skips back to the beginning of the current track.
(twice): Skips to the previous track.
(Folder down),
USB
: Skips to the previous folder.
: Skips to the next folder.
(Previous disc),
(Search
(Skip forward)
(Folder up)
(Next disc)
5
En