Erwin Sattler Rotalis Bedienungsanleitung Seite 93

How to make settings on your watch winder
The SMART INTERFACE is the user interface via which all functions of your watch
winder can be controlled.
Before this can be used, the following settings must be made:
1.
Connect your WIFI-enable device (smartphone, tablet, PC etc.) to the watch winder
by selecting network (SSID) in the WIFI settings for your device.
The network name is made up as follows:
ES_watch winder short name_serial number
Watch winder short names:
(*Serial number: see certificate, page 51)
It will take up to one minute to establish the connection.
2.
At the prompt, enter the required password (see page 51).
Now you should be connected to the watch winder network.
3.
Start your browser (Internet Explorer, Mozilla, Safari, etc.)
and enter the IP address of the watch winder. It is as follows: 192.168.2.1/index.php
4.
Open the search function of your browser.
The following start screen should look like the image at the left. This interface shows a
clear overview of all functions.
Rotalis 3 ES_RO03_ (Serial number*)
Rotalis 6 Wood
ES_RO06_ (Serial number*)
Rotalis 10 Wood ES_RO10_ (Serial number*)
Rotalis 15 ES_RO15_ (Serial number*)
Rotalis 24 ES_RO24_ (Serial number*)
Rotalis 30 ES_RO30_ (Serial number*)
Rotalis 60 ES_RO60_ (Serial number*)
39