Erwin Sattler Rotalis Bedienungsanleitung Seite 78

Manual of the fingerprint reader
The glass pane can only be opened by means of a
fingerprint reader if the corresponding data of the
finger have already been stored.
• To open the glass pane
To open the glass pane, pull an already stored finger
quickly over the fingerprint reader with low pres-
sure. After successful reading, the glass pane
opens completely.
A detailed description of all functions of the finger-
print reader, especially the storing of new finger
data, can be found at the page 44.
Functions behind the right sliding panel
Maintenance socket
Only for employees of the Erwin Sattler
manufactory!
Button
Clock light on / off
Fuse in case of failure
Round black plastic cover: The holder for the
fuse of the Rotalis 24 is located here. In the
event of a fault, please check the fuse and
replace it with a new one if necessary with
a fuse: M 5A/250V.
Lock
Opening the glass pane with the help of the key, turn to the right.
Inserting watches
Before inserting the wristwatches, please make sure that the motor is stopped. Now you can
place the watch on its watch holder..
To remove the watch from the watch
winder unit, grab the watch holder at
both levers and pull off from the holding
mechanism.
The watch holders are available in three
sizes for different wrist sizes.
24