Settings Date & Time; Setting 5 Digits' Local Area Code - Geemarc DALLAS20 Bedienungsanleitung

between the different items of the sub-menus. You can leave the
setting mode by pressing the delete
SETTING DATE AND TIME
When in the setting menu, go to the "SET 1 DATE" sub-menu and
press the key. The display shows the year and flashes. Use the
arrow keys
key to confirm. The display now shows the month and flashes.
Use the arrow keys
press the key to confirm. You are now asked to set the day and
time (the hour first and then the minutes). Follow the same method
as before and use the arrow keys
desired values before pressing the
done, the display will show the information you have entered.
After the time and date are set, the LCD display will automatically
display the corresponding week and current month calendar. The CID
incoming call signal automatically refreshes the original system date
and time, and the DTMF incoming call signal has no effect on the
original system time and date settings.
SETTING 5-DIGIT LOCAL AREA CODE
When in the setting menu, go to the "SET 2 CODE" sub-menu and
press the key.
The display reads "CODE----" and flashes. Use the arrow keys
and to individually of your select the digits local area code and
press the key to confirm each one.
PHONE'S SETTING
and to set the correct year and press the
and
key.
to set the correct month and
and
key to confirm. Once that is
8
to go to the