T/P Switch; Time Break Recall Switch; Wall Mounting - Geemarc CL1100 Benutzerhandbuch

Setting up
3 - TONE/PULSE SWITCH (T/P)
The Tone/Pulse switch is factory pre-set to Tone
position (T). In UK, all telephone exchanges now
use Tone dialling. If your phone does not dial out,
it is probably being used from an older private
switch- board (PBX). In this case, theTone/Pulse
switch must be moved to Pulse.
4 - TIME BREAK RECALL (TBR) SWITCH
For UK, the TBR switch should be set to 100 mS.
It can be switched to 300 mS for other locations or
PBX's.
Note: If you are using your CL1100
with a hearing aid, set your hearing
aid to "T" position.

5 - WALL MOUNTING

To wall-mount your telephone, slide out the clip,
turn and slide back into the wall mounting position
11