Using Your Phone; Using Pre-Dial; Incoming Call (Outgoing Call) Query; Call Timing - Geemarc DALLAS20 Bedienungsanleitung

CALL LOG INFORMATION/ USING YOUR PHONE
REVIEWING PAST OUTGOING CALLS
With the receiver "on-hook", press the "OUT" key to review the list of
the last 17 dialed numbers as well as the call duration for each. Press
the "OUT" key each time you wish to see the number dialed before
the one shown on the display. You can press the
or pick up the handset to dial out the number showing on the display.

7- USING YOUR PHONE

If you are wearing hearing aids, set your
hearing aid to the "T" setting.

USING PRE-DIAL

With the receiver "on-hook", dial the number you wish to call and then
press the key, the
case you mistype when dialing the number, pressing the delete
key erases the digit last entered.

INCOMING CALL (OUTGOING CALL) QUERY

After off-hook, you can use the
check incoming calls, or use the
outgoing calls.

CALL TIMING

After off-hook dialing, the phone automatically enters the call timing,
and manual timing is not allowed.
key or pick up the handset to dial out. In
13
key, the
and keys to
key (one-way) to check
key