Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SETTING UP
3 – Ringer Tone / Time Break Recall setting
(300/100)
The phone is equipped with "Mechanical Bell" ringers which can be
selected between UK (tring..tring) & European (triiiiiiiiiiiing) style
bells, via the switch located in the battery compartment.
The mechanical bell sound is functional only when the batteries are
inserted and are not run down.
If there are no batteries or the batteries are "low" the Battery low
indicator flashes and the ringer sound will be the normal two tone
electronic ring.
Your phone works with a time break recall for United Kingdom
(R=100msec). It can be switched to 300msec for other locations or
PBXs. Use the same switch as used to select the Ringer tone, to
select the Recall time
4 – Auto Dial Switch
When this switch is in ON position (
), upon lifting the handset the
phone will automatically dial out the number stored in the SOS
memory if no other dial button is pressed for 4 seconds. Set this
switch as per your requirement.
5 – Auto On Hook
When this switch is in the On position (
) , the phone will
automatically go On Hook (disconnect the telephone line) when the
person at the other end disconnects the line, even if the handset is
not replaced on the cradle.
In case the handset is removed from the cradle and there is a phone
call, the phone will still ring as usual. To answer the call, pick up the
handset, press and release the hook button once.
6
Werbung
Kapitel
Inhaltsverzeichnis
