Cooling/Heating Operation; Dry Operation; Fan Only Operation (Cooling-Only Models Only) - Toshiba RAS-M10GKCVP-E Bedienungsanleitung

COOLING/HEATING OPERATION

Start
a button
Press this button to start the air conditioner.
b Mode select button (MODE)
Select COOL or HEAT
c Temperature button (
TEMP
Set the desired temperature.
d Fan speed button (FAN)
Select one of "AUTO" LOW
HIGH .
• The OPERATION indicator (green) on the display panel of the indoor unit turns on.
Operation starts after approximately 3 minutes.
Stop
button
Press this button again to stop the air conditioner.
• Heating operations cannot be performed by a cooling-only model.

DRY OPERATION

Start
a button
Press this button to start the air conditioner.
b Mode select button (MODE)
Select DRY .
c Temperature button (
TEMP
Set the desired temperature.
• The fan speed setting is fixed to AUTO and the AUTO is displayed.
• The OPERATION indicator (green) on the display panel of the indoor unit turns on, and
operation starts after approximately 3 minutes.
Stop
button
Press this button again to stop the air conditioner.
FAN ONLY OPERATION
Start
a
button
Press this button to start the air conditioner.
b Mode select button (MODE)
FAN ONLY .
c Fan speed button (FAN)
Select one of "AUTO" LOW
HIGH .
• The OPERATION indicator (green) on the display panel of the indoor unit turns on.
Operation will start immediately.
• The : FAN ONLY mode does not control the temperature.
Stop
button
Press this button again to stop the air conditioner.
(heat pump models only).
)
, LOW+ , MED
)
(cooling-only models only)
, LOW+ , MED
, MED+ ,
, MED+ ,
9
AUTO
PURE
c TEMP
b
MODE PRESET
a
HiPOWER ECO MEMO
d
1 . 3 . 5 . 9H
SWING FIX FAN SLEEP
CLR SET
ON OFF
CLOCK
RESET
CHECK
AUTO
PURE
c
TEMP
b
PRESET
MODE
a
HiPOWER ECO MEMO
1 . 3 . 5 . 9H
SWING FIX FAN SLEEP
CLR SET
ON OFF
CLOCK
RESET
CHECK
PURE AUTO
TEMP
b
MODE PRESET
a
HiPOWER ECO MEMO
c
1 . 3 . 5 . 9H
SWING FIX FAN SLEEP
CLR SET
ON OFF
CLOCK
RESET
CHECK
EN