Connecting To Syr Connect - syr HygBox Connect Anleitung Zur Montage, Inbetriebnahme, Bedienung Und Wartung

The corresponding confirmation appears.
4
Return to the list of devices in your project. A green dot
5
indicates that the connection has been established: The
HygBox Connect is connected to your wireless network.
Please ensure that you are near to the device so
that it can establish a connection.
If a connection fails to be established, plea-
se check whether the AccessPoint mode of the
HygBox Connect is activated. The AccessPoint is
switched off after three minutes and has to be
reactivated, if required.
Via SYR CONNECT, the HygBox Connect is easy to control and monitor and can be connected to other
SYR CONNECT devices, if required.
9.3. Connection to SYR CONNECT
You have successfully registered the HygBox Connect and connec-
ted it to the wireless network.
To operate the device, start the SYR App and click on the SYR
Connect button on the bottom left of the start screen
Enter your user name and password. Click on LOG IN.
1
Press the slider and you can remain logged in.
The project you created is displayed.
2
4
5
1
2
27