Installation Of The Waste Water Connection Set - syr HygBox Connect Anleitung Zur Montage, Inbetriebnahme, Bedienung Und Wartung

6.3. Installation of the Waste Water Connection Set

•
Mount the HygBox using the adapter ⅜" x ¾" (included in the Connection Set) with commercially available
transition pieces.
•
Connect the drain hose via one of the two John Guest connectors with the Waste Water Connection Set
(Art.no. 2622.00.901)
Assembly, commissioning, operation and maintenance HygBox Connect
and insert the plug of the humidity sensor into the HygBox connection
¾" male thread
The arrows to mark the direction of
flow are on the bottom of the casing.
Arrows mark the direction
to open the battery com-
partment.
¾"
male thread
(p. 9 4 ).