Maintenance; Maintenance Schedule - Husqvarna BMP 335 Bedienungsanweisung

To stop the product
1. Pull the lift lever up.
2. Turn the depth adjustment wheel until the tool drum
does not touch the ground.
Introduction
WARNING:
maintenance, you must read and
understand the safety chapter.
For all servicing and repair work on the product, special
training is necessary. We guarantee the availability of
professional repairs and servicing. If your dealer is not
a service agent, speak to them for information about the
nearest service agent.
General product maintenance
Clean the product.
14
0mm 10 20 30

Maintenance

Before you do
Daily
X
3. Push the OFF button for the drive motor and the
OFF button for the drum motor.
4. Wait until all moving parts are fully stopped.
5. Stop the dust extractor.
6. Disconnect the power plug.

Maintenance schedule

* = General maintenance done by the operator. The
instructions are not given in this operator's manual.
X = The instructions are given in this operator's manual.
O = The instructions are not given in this operator's
manual. Let an approved service agent do the
maintenance.
12h after service Each 3 months Yearly
1838 - 002 - 06.04.2022