Husqvarna BMP 335 Bedienungsanweisung Seite 17

1. Remove the drive belt cover.
2. Push 5–10 g of grease into the grease nipple with a
grease gun.
1838 - 002 - 06.04.2022
To do a check of the drive belt tension
1. Measure the drive belt tension in the center of the
drive belt span (A). Correct tension is 105 Hz.
C
B
2. If it is necessary to adjust the drive belt tension, do
these steps:
a) Loosen the nut (B).
b) Turn the nut (C) clockwise to tighten the drive
belt.
c) Turn the nut (C) counterclockwise to loosen the
drive belt.
d) Tighten the nut (B).
A
17