Disposal Of The Product; Technical Data Bmp 335 - Husqvarna BMP 335 Bedienungsanweisung

1. Attach the lifting equipment at the lifting eye.
2. Lift the product safely.
To attach the product to a
transportation vehicle
1. Make sure that the drive wheels are engaged. Refer
To disengage and engage the drive system on
to
page 19 .
2. Attach tie-down straps in the lifting eye and the holes
for tie-down straps. Refer to
page 2 for information about where the holes for
tie-down straps are on your product.
Motor power, kW
Electrical connection, V
Frequency, Hz
Power connector, pole/A
Amperage consumption, A
Operation width, mm
Rotation speed of scarifier drum, min
Bearing grease type
Weight excl. drum, kg
1
Noise emission level
2
Sound power level
Vibration level (Handle), m/s
Ambient temperature, °C
Diameter dust hose connection, mm
1
Uncertainty 3 dB(A).
2
Uncertainty 3 dB(A).
3
Uncertainty 1.5 m/s
20
Product overview on

Technical data BMP 335

-1
2 3
,
2
3. Attach and tighten the tie-down straps to the
transportation vehicle.
Storage
CAUTION:
storage outdoors. Always keep the product
indoors.
• Keep the product in a dry and frost free area.
• Clean the product and do a complete servicing
before you put the product in storage.
• Keep the product in a locked area to prevent access
for children or persons that are not approved.

Disposal of the product

• Obey the local recycling requirements and applicable
regulations.
• When the product no longer is used, send it to
a Husqvarna dealer or discard it at a recycling
location.
3x400V, 50 Hz
3x400
50
Do not put the product in
3x480V, 60 Hz
11+1.1
3x480
60
5/32
19.6+3.4
335
1000
E08729
442
100
114
3.1
-5–40
100
1838 - 002 - 06.04.2022