Safety Instructions For Maintenance - Husqvarna CA230 Bedienungsanweisung

professional repairs and service. If the
retailer who sells your product is not a
servicing dealer, ask him for the address of
your nearest service agent.
To do a check of the cutting equipment
The tines are designed and machined to withstand the
loads resulting from cultivating.
The two basic rules:
1. Only use cutting attachments with the guards we
recommend!
2. Check the cutting attachment for damage or cracks.
A damaged cutting attachment should always be
replaced.
To do a check of the cutting attachment guard
This guard is intended to prevent loose objects from
being thrown towards the operator. The guard also
protects the operator from accidental contact with the
cutting attachment.
1. Ensure that the guard is undamaged and is not
cracked.
2. Replace the guard if it has been exposed to impact
or is cracked.

Safety instructions for maintenance

WARNING: Read the warning instructions
that follow before you do maintenance.
6
WARNING: Always stop the product before
you work on any part of the attachment. It
can continue to move even after the throttle/
power trigger is released. If you have a
gasoline operated product, disconnect the
HT leads from the spark plug. If you have a
battery operated product, remove the
battery. Ensure the attachment has stopped
completely before you start to work on it.
• Cultivating should only be done in daylight or other
well-lit conditions.
• Check the entire product before starting. Replace
damaged parts. Check that all guards and covers
are complete and fastened securely. Check all nuts
and screws.
• If you have a gasoline operated product, make sure
that there are no fuel leaks.
• Check that the blades are undamaged and show no
signs of cracking or other damage. Replace the
blades if necessary.
• Make sure the cutter guard is fitted and not
damaged.
• Check that the tines and tine guard are secured
correctly. Make sure the direction of rotation agrees
with the cutters and on the gear. The arrows must
point in the same direction.
• Check that the blades do not move when the throttle/
power trigger is released.
742 - 002 - 13.12.2019