Husqvarna BMP 335 Bedienungsanweisung Seite 13

13. Turn the speed adjustment knob to set the drive
speed.
To operate the product
WARNING:
operation only. Do not move the product
rearward when the tool drum is in operation.
• Push the joysticks to move the product.
• Adjust the depth if it is necessary. One full revolution
of the depth adjustment wheel adjusts the depth 1.1
mm.
1838 - 002 - 06.04.2022
This product is for forward
• Monitor the ammeter during the operation. The
maximum amperage for each motor type is as
follows:
a) For motor type 3x400V, 50 Hz: 19.6 A.
b) For motor type 3x480V, 60 Hz: 16.6 A.
• To make it easier to move straight, fold down the
direction pointer.
Note:
The direction pointer can be adjusted
laterally.
13