Stihl RE 90.0 Gebrauchsanleitung Seite 33

6 Assembling the pressure washer
Mounting the Handle
2
3
► Slide the handle (1) onto the holder (2).
► Insert screws (3) and tighten.
Installing the holder
► Suspend the holder (1) into the guides (2).
The holder (1) engages with an audible click.
Inserting nozzles
1
2
► Insert fan-jet nozzle (1) and rotary nozzle (2).
Attaching spraying set
1
► Insert spraying set (1).
0458-002-9621-B
6.2
6.2.1
1
► Push the connector (1) in the high-pressure
washer (2).
The connector (1) engages with an audible click.
► If it is difficult to slide the connector (1) into the
high-pressure washer: Grease the connector
1
(1) with grease for fittings.
6.2.2
2
► Press and hold the locking lever (2).
► Pull out the connector (2).
6.3
6.3.1
► Slide the connector (2) into the spray gun (1).
The connector (2) engages with an audible
click.
► If the connector (2) cannot be easily pushed
into the spray gun (1): Grease the gasket on
the connector (2) with grease for fittings.
Fitting and removing the high-
pressure hose
Connecting high-pressure hose
2
1
Removing high-pressure hose
1
Attaching and removing the
spray gun
Attaching the spray gun
1
2
English
2
33