Cassette Player - Panasonic CQ-FX721N Bedienungsanleitung

Cassette Player

E
N
G
L
I
S
H
REMO TE
CH·C
1 2
13
PTY
To Stop and Eject the cassette
Press [u].
[DISP] (Return)
[BAND] (PRG/Set)
REM OTE
CH· C
1 2
PTY
[1] [2]
[MENU]
[P·SET}] [P·SET{] (Select)
[6] (Repeat)
[SOURCE]
[}]
(Metal Tape)
(Dolby B NR)
(Select)
[BAND]
(PRG/Set)
[]]
(Rewind)
Direct play setting from remote control when the menu is not dis-
played
Press [6] (Repeat) on the remote control. Press again to cancel.
Cautions:
¡To avoid damaging the front panel, do not push it down or place objects on it while it is open.
¡ Do not pinch your finger or hand in the front panel. Do not insert foreign matter into the cassette slot.
16
CQ-FX721N
Open the Front Panel
1
Press [OPEN] on the front panel.
Cassette Insert
2
Playback starts. Close the front panel.
Notes :
¡Do not insert a cassette when
lights.
¡Loading a cassette when the power is off allows
Exposed end
the power to be turned on. (When ACC
(Open end)
a
Selection is set to ON page 24)
¡Ejecting the cassette when the unit is in the cas-
sette mode allows the mode returns to the pre-
vious one.
Cassette Player Mode Display
Play side
When a Cassette is inside
Metal tape, Dolby B, Blank
(Blinks during Cassette play)
skip and Repeat Indicator
When a cassette is in the player
[SOURCE]
Press [SOURCE] to select the cassette player
mode and playback starts.
Playing Side Change
Press [BAND] to reverse.
Fast forward and Rewind
[TRACK2] / [[] : Fast forward
[SEL] (Menu)
[TRACK1] / []] : Rewind
Press [BAND] to resume the tape play.
[[]
(Fast Forward)
Dolby Noise Reduction
¡Press [P·SET}] / [}] to set the Dolby B
[DISP]
(Return)
NR mode.
¡Press [P·SET}] / [}] again to cancel.
[{]
Metal Tape Mode
(TPS)
(Blank Skip)
¡Press and hold [P·SET}] / [}] for more
(Select)
than 2 seconds when playing metal or chromi-
um dioxide (CrO ) tapes.
2
¡Press and hold [P·SET}] / [}] again to
cancel.
Tape Program Search (TPS)
q Press [P·SET{] / [{] to activate the Tape Program
Search mode.
w To select a desired program, press [ 2 ] or [ 1 ] cor-
responding times to go forward (up to 9) or backward
(up to 8).
e Press [P·SET{] / [{] again to cancel.
indicator
Notes:
The TPS mode may not work correctly in the following cases. This, however, does not mean that the unit is defective.
¡There is an interval less than 3 seconds or having a high level of noise or hum between programs.
¡There is particularly low-level passage during the program.
q Press [MENU] / [SEL] during cassette playing.
w Press [P·SET}] or [P·SET{] / [}] or [{] to select an item.
e Press [BAND] to switch on or off in turn.
Notes:
¡If no keys have been pressed for more than 15 seconds, the display returns to the previous one after changing to the
menu display.
¡Press [DISP] to return to the regular mode.
Metal Tape
Mode
Dolby B Noise
Reduction
Tape Program
Search (TPS)
Repeat Play
Blank Skip
Blank Skip
¡Press and hold [P·SET{] / [{] for more than 2 sec-
onds to skip unrecorded portions longer than 15 sec-
onds on the tape.
¡Press and hold [P·SET{] / [{] again to cancel.
Note: The blank skip does not work when an unrecorded
portion of a tape is less than 15 seconds.
Cassette Tape Mode Setting
Cassette Menu Display
Play Settings
ON : When playing metal or chromium dioxide (CrO
Select
tapes.
MTL
OFF : Cancel - When playing normal tape
ON : Set the Dolby B NR mode.
Select
DOLBY
OFF : Cancel
ON : Activate the Tape Program Search mode.
Select
* Operation after this are the same as the opera-
tions described above.
TPS
: Cancel
OFF
ON : Repeat the current selection.
Select
REP
OFF : Cancel
ON : Skip unrecorded portions longer than 15 seconds
Select
on the tape
B • SKIP
OFF : Cancel
CQ-FX721N
E
N
G
L
I
S
H
14
)
2
17