Important Information; General - Nibe EME 20 Installateurhandbuch

English

Important information

SAFETY INFORMATION
This manual describes installation and service procedures
for implementation by specialists.
The manual must be left with the customer.
This appliance can be used by children
aged from 8 years and above and per-
sons with reduced physical, sensory or
mental capabilities or lack of experience
S
and knowledge if they have been given
supervision or instruction concerning use
of the appliance in a safe way and under-
stand the hazards involved. Children shall
not play with the appliance. Cleaning and
user maintenance shall not be made by
children without supervision.
This is an original manual. It may not be
translated without the approval of NIBE.
Rights to make any design or technical
modifications are reserved.
©NIBE 2021.
SYMBOLS
NOTE
This symbol indicates danger to person or machine
.
Caution
This symbol indicates important information about
what you need to consider when installing, servi-
cing or maintaining the installation.
TIP
This symbol indicates tips on how to facilitate us-
ing the product.
8
MARKING
Explanation of symbols that may be present on the product's
label(s).
Danger to person or machine.
!
Read the Installer Manual.

General

NIBE EME 20 is used to enable communication and control
between the inverter for solar cells and heat pump/indoor
module/control module.
This manual describes installation and service procedures
for implementation by specialists.
The manual must be left with the customer.
COMPATIBLE PRODUCTS
• S1155
• S1255
• SMO S40
CONTENTS
1 x Communications module
2 x Mounting screws
COMPONENT POSITIONS
ELECTRICAL COMPONENTS
X1 Terminal block, power supply
AA23 Communication board
AA23-S2 DIP switch
• VVM S320
• VVM S325
X1
AA23
AA23-S2
NIBE EME 20 S-series | GB