Updating The Firmware - Werma AndonWIRELESS Handbuch

9 Updating the firmware
EN
When an AndonWIRELESS device with outdated firmware is connected, the AndonWIRELESS con-
figuration software detects the outdated firmware. A corresponding message appears that allows
a firmware update to be performed.
Damage caused by an interruption to the firmware update!
If the firmware update is interrupted, the AndonWIRELESS device may be damaged or the
AndonWIRELESS device may no longer be accessible.
1. Never interrupt the firmware update.
2. Do not disconnect the USB cable from the AndonWIRELESS device until the firmware
update is complete.
The firmware is saved in the AndonWIRELESS configuration software. To obtain the latest
available firmware, WERMA recommends updating the AndonWIRELESS configuration soft-
ware before performing a manual firmware update, see "Transferring the configuration to
other Andon WirelessBOXes", S. 60.
If necessary, the firmware update can be performed manually as follows:
1. Use the USB cable to connect the AndonWIRELESS device to the computer.
2. Click on Firmware Update in the Tools menu.
WERMA AndonWIRELESS checks if a firmware update is available for the AndonWIRELESS
device.
If a firmware update is available, the Firmware Update window appears.
70