Behaviour When Entering And Leaving The Network; Operation With A Power Supply Unit; Battery Operation - Werma AndonWIRELESS Handbuch

1.5 Behaviour when entering and leaving the network
EN
1.5.1 Operation with a power supply unit
Once an Andon WirelessBOX or Transceiver is outside the network, the status is not synchronised on
the network. If the network is not reached, the status LED blinks red. Synchronisation occurs when
the device re-enters the network. The network synchronises any status changes and displays the
most current status.
1.5.2 Battery operation
Once an Andon WirelessBOX or Transceiver is outside the network, the status is not synchronised on
the network. If the network is not reached, the status LED blinks red. Synchronisation occurs when
the device is back on the network and a status change occurs within the network.
A status command is not saved and is not sent after re-entering the network.
Version: 1.1 - 09/2021 51