Configuring Button Colours - Werma AndonWIRELESS Handbuch

4.2.3 Configuring button colours
EN
It is possible to define the colour in which the button lights up when it is pressed for each button. In
addition, it is possible to specify whether the button remains lit after it has been pressed and displays
the status of the tier if the Andon WirelessBOX is powered via the USB-C port. This allows the current
status of the signal tower to be displayed on the Andon WirelessBOX.
1. Move to the Button LED configuration tab.
2. Select the desired colour for the button in the Button LED colour selection list.
The button in the symbolic view takes over the selected colour.
58