Exporting And Importing The Configuration; Exporting The Configuration To A Configuration File; Importing The Configuration From The Configuration File - Werma AndonWIRELESS Handbuch

6 Exporting and importing the con-
figuration
The configuration of an Andon WirelessBOX can be saved in a configuration file and imported
again at a later time. The configuration file can also be loaded for a Transceiver. In this case, only
the radio channel and network ID are imported. The tier assignment is not loaded.
6.1 Exporting the configuration to a configuration file
Settings can only be exported with an Andon WirelessBOX. Settings of a Transceiver cannot
be exported.
1. Perform the configuration as desired.
2. Click on Export to file.
3. Navigate to the desired location.
4. Enter the desired file name.
5. Click on Save.
6.2 Importing the configuration from the configuration file
1. Click on Import from file.
2. Navigate to the saved configuration file (*.json) and click on Open.
The configuration is loaded and displayed.
The configuration can be modified and transferred to the AndonWIRELESS device, see
"Creating a new configuration or modifying an existing configuration", S. 55 or see "Creating
a new configuration or modifying an existing configuration", S. 64.
Version: 1.1 - 09/2021
EN
67