Werma AndonWIRELESS Handbuch Seite 57

2. For each tier of the signal tower, select the status after pressing the button briefly (short press)
and after pressing the button for longer (long press).
Status
Keep current state
Off
On
Blink
Flash
Toggle Off/On
Toggle Blink/Off
Toggle Flash/Off
Toggle On/Blink
Same as short press
The Configuration examples (see "Configuration examples", S. 73) shows a few examples of
possible practical configurations.
Version: 1.1 - 09/2021
Description
– Retain the current status of the tier.
– Switch off the tier.
– Switch on the tier.
– Let the tier blink.
– Let the tier flash.
– Toggle between: Off <-> On
– Switch off the tier if the tier is switched on, blinks or flashes.
– Switch on the tier if the tier is switched off.
– Toggle between: Blink <-> Off
– Let the tier blink if the tier is switched on, switched off or flashes.
– Switch off the tier, if the tier blinks.
– Toggle between: Flash <-> Off
– Let the tier flash if the tier is switched on, switched off or blinks.
– Switch off the tier if the tier flashes.
– Toggle between: On <-> Blink
– Switch on the tier if the tier is switched off, blinks or flashes.
– Let the tier blink if the tier is switched on.
– Accept the status of the short press setting.
EN
57