Transferring The Configuration To The Andon Wirelessbox - Werma AndonWIRELESS Handbuch

4.2.4 Transferring the configuration to the Andon WirelessBOX
EN
When the configuration is complete, the settings can be transferred to the Andon WirelessBOX.
If the configuration is to be transferred to other Andon WirelessBOXes at a later time, the cur-
rent configuration can be exported to a configuration file, see "Exporting the configuration
to a configuration file", S. 67.
WERMA recommends that you export the configuration to a configuration file to be able to
import the setting of the radio channel and network ID for the configuration of the Trans-
ceiver.
1. Click on Save to device.
The configuration is transferred to the Andon WirelessBOX.
When the transfer is complete, the current configuration can be transferred to other
Andon WirelessBOXes.
The current configuration can only be transferred to an Andon WirelessBOX with the same
number of buttons as in the configuration.
2. Click on Yes to transfer the current configuration to other Andon WirelessBOXes, see "Transferring
the configuration to other Andon WirelessBOXes", S. 60.
3. Click on No to configure another AndonWIRELESS device.
4. Remove the USB cable from the Andon WirelessBOX.
Transferring the configuration to other Andon WirelessBOXes
1. Remove the USB cable from the Andon WirelessBOX.
2. Connect other Andon WirelessBOXes with the same number of buttons as in the configuration to
the computer.
3. Click on Save to device.
60