Setting The Radio Channel And Network Id; Configuring The Button Functions - Werma AndonWIRELESS Handbuch

4.2.1 Setting the radio channel and network ID
EN
All AndonWIRELESS devices that are to communicate with each other must use the same
radio channel and the same network ID.
1. Select the common radio channel for the Andon WirelessBOX and Transceiver in the Radio chan-
nel selection field.
2. Enter the common network ID for the Andon WirelessBOX and Transceiver in the Radio network
id field.
Possible characters for the Radio network id:
– Numbers from 0 to 9
– Letters from A to F
4.2.2 Configuring the button functions
The status of each tier of the signal tower can be defined for each button. A distinction can be
made as to whether the button is pressed briefly (short press) or for longer than 1 second (long
press).
Andon WirelessBOXes that jointly control a signal tower do not need to have the same con-
figuration and can have different button configurations.
1. Click on the button that you want to configure in the symbolic view.
56