Always Use Common Sense; Safety Instructions For Operation; Extension Cables - Husqvarna DM 230 Bedienungsanweisung

injury or death, we recommend persons with medical
implants to speak to their physician and the medical
implant manufacturer before operating this product.
• Keep the product clean. Make sure that you can
clearly read signs and decals.
• Do not use the product if it is defective.
• Do not do modifications to this product.
• Do not operate the product if it is possible that other
persons have done modifications to the product.

Always use common sense

WARNING:
should you modify the original design of
the product without approval from the
manufacturer. Always use original spare
parts. Unauthorized modifications and/or
accessories may lead to serious injury or
death to the user or others.
WARNING:
as cutters, grinders, drills, that sand or form
material can generate dust and vapours
which may contain hazardous chemicals.
Check the nature of the material you intend
to process and use an appropriate breathing
mask.
It is not possible to cover every conceivable situation
you can face when using the product. Always exercise
care and use your common sense. Avoid all situations
which you consider to be beyond your capability. If
you still feel uncertain about operating procedures after
reading these instructions, you should consult an expert
before continuing.
Do not hesitate to contact your Husqvarna
representative if you have any more questions about the
use of the product. We will willingly be of service and
provide you with advice as well as help you to use your
product both efficiently and safely.
Let your Husqvarna dealer check the product regularly
and make essential adjustments and repairs.
Husqvarna Construction Products has a policy of
continuous product development. Husqvarna reserves
the right to modify the design and appearance of
products without prior notice and without further
obligation introduce design modifications.
All information and all data in the operator's manual
were applicable at the time the operator's manual was
sent to print.

Safety instructions for operation

WARNING:
instructions that follow before you use the
product.
1473 - 001 - 04.04.2022
Under no circumstances
The use of products such
Read the warning
• Do not operate the product unless you can get aid if
an accident occurs.
• Do not use the product in bad weather, such as
fog, rain, strong winds, intense cold and equivalent
conditions. Dangerous conditions, such as slippery
surfaces, can occur because of bad weather.
• Look out for persons, objects and situations that can
prevent safe operation of the product.
• When the drill points up during operation, always use
an applicable container to collect the water.
• If used in a drill stand, always attach the product to
an applicable drill stand before operation. Refer to
To use the product with a drill stand on page 10 .
• Make sure that you always can stop the motor
quickly in an emergency.
• Make sure that there are no pipes or electrical
cables in the area where the hole will be made.
• If the product does not operate correctly, stop the
motor.
• Make sure that you are in a safe and stable position
during operation.
• Stay at a distance from the drill bit when the motor is
on.
• Do not go away from the product when the motor is
on.
• Always disconnect the power cord before you go
away from the product.
• Keep all parts in good condition and make sure that
all fixtures are correctly tightened.
• If vibrations occur in the product or the noise level
from the product is unusually high, stop the product
immediately. Examine the product for damages.
Repair damages or let an approved service agent
do the repair.
• Always use approved accessories. Speak to your
dealer for more information.
• Brace the tool properly before use. This tool
produces a high output torque and without properly
bracing the tool during operation, loss of control may
occur resulting in personal injury.

Extension cables

• Use only approved extension cables with sufficient
length.
• The rated value on the extension cable must be the
same or higher than given on the rating plate of the
product.
• Use grounded extension cables.
• When you operate the product outdoors, use
an extension cable that is applicable for outdoor
operation. This decreases the risk of electrical
shock.
• Keep the connection to the extension cable dry and
off the ground.
• Keep the extension cable away from heat, oil, sharp
edges or moving parts. A damaged cable increases
the risk of electrical shock.
7