How It Works; Using The Scale; Starting The Scale - ADE M320000-01 Gebrauchsanweisung

Indicator front
Mounting
plate for
indicator
Long column
(850mm)
Holes for length
measuring rod
Column support with
plug connection
Weighing
surface
The mechanical forces acting on the scales are transformed into measurable and evaluable
electrical signals by load cells. The weighing result is displayed continuously.
7.1

Starting the scale

7.1.1 Per key
To switch on the scale, briefly press the ON/OFF key.
After a brief functional test, the scale will show "0.00 kg" and the symbol >0<.
The scale is now ready for use.
The scale will start automatically with the last function used. When used for the first time, the scale
will start automatically with the hold function.
7.1.2 Tap to start
Briefly load the weighing surface of the scale by briefly "tapping" it with your foot. If done correctly,
a short functional test will follow, at the end of which the scale will show "0.00 kg" and the symbol
>0<. The scale is ready for use.
M320000-01+02-210429-Rev004-UM-en

6. How it works

7. Using the scale

Mains connection
Indicator back
M6 cheese head screw
M12 cheese head screw
Short column (100 mm)
Support feet
Battery
compartment
Mains connection
Cable with band
at both ends
Page 31 of 120