Product Overview - HEIDENHAIN EIB 700 Betriebsanleitung

Operating Instructions en
4 Installation
NOTICE
Risk of damage to internal components!
Do not engage or disengage any connecting elements
while the product is under power.
Depending on the product's equipment, the
installation may differ from the procedure
described in this chapter. If the Addendum
included with the product contains information
on the installation, the information given in
the Addendum takes precedence over the
information in this chapter.
The illustrations of pin layouts always show
the pin assignments of the connections on the
product, and not of the connectors.
The safety of any system incorporating the
use of this product is the responsibility of the
operator of the system.
26
4.1

Product overview

Front panel
See "A" on the front fold-out page.
1
LEDs for displaying the operating sta-
tus and errors of the product
X11 to X14 X14 Four 15-pin D-sub inputs for encoders
with
1 V
PP
11 µA
EnDat interfaces
Rear panel
EIB 741: See "B" on the front fold-out page.
EIB 742: See "C" on the front fold-out page.
EIB 749: See "D" on the front fold-out page.
2 EIB 741 and EIB 749: Power switch
3
Internal reset button
4
Fan of the product
5 EIB 742: Functional ground connection
6 EIB 749: 2-pin connection for external re-
mote reset switch
X4
8-pin Ethernet connection RJ-45 for the
connection to a PC
X5
Not assigned
X6
Power connector
EIB 741/749: 100 V AC to 240 V AC
EIB 742: 24 V DC
X31
9-pin trigger input RS-485
X32
9-pin trigger output RS-485
interfaces
interfaces upon requests
PP
EIB 700