Maintenance Schedule - HEIDENHAIN EIB 700 Betriebsanleitung

EIB 700
6 Maintenance
This chapter contains a description of
maintenance work for the product only. For a
description of maintenance work for peripheral
devices, please refer to the documentation of the
peripheral concerned.
6.1 Cleaning
NOTICE
Never use abrasive cleaners, and never use strong
detergents or solvents.
Never use a cleaning cloth that is dripping wet.
Use only a cloth dampened with water and a mild
detergent for cleaning the exterior surfaces.
6.2

Maintenance schedule

The product is largely maintenance-free.
The following steps are only to be performed by
electrical specialists!
For more information, see "Personnel
qualification", page 23.
NOTICE
Do not operate or repair the product if damaged.
Have the manufacturer exchange defective electrical
components immediately.
Maintenance Interval
step
All labels and Annually
symbols provided
on the product
must be checked
for readability
Electrical connec- Annually
tions must be
function tested
and checked for
damage
Power cable must Annually
be checked for
improper insulati-
on or weak points
Protective ground Annually
connection must
be function
tested and che-
cked for proper
connection
Operating Instructions en
Corrective ac-
tion
Contact HEIDEN-
HAIN service
agency
Replace defective
cables. Contact
HEIDENHAIN ser-
vice agency if re-
quired
Replace power
cable according to
specification
Replace connec-
ting leads
33