Operation; Refilling The Regenerative; Actuating Manual Regeneration - BWT Rondomat Duo-DVGW 2 Einbau- Und Bedienungsanleitung

min. Befüllmenge Salz
▼
min. filling height salt
8

Operation

8.1

Refilling the regenerative

NOTE
The amount of regenerative should never fall below the
minimum level (see sticker on the salt/brine container).
At the latest, regenerative must added when the minimum level in the
salt/brine container is reached.
All commercially available regenerative salts conforming to EN 973 can
be used (in loose or tablet form).
Unscrew and remove the lid of the salt/brine container. Pour in the re-
generative (always adding whole units) up to a maximum of 75 / 150 kg.
Close the lid.
Drain excess brine off through the overflow.
8.2

Actuating manual regeneration

Press the Browse button
Set the cursor to Manual
Press OK
Set the cursor to Regeneration
Press OK to confirm
The unit is regenerating
Press the Browse button twice
Each stage of the regeneration process is displayed with the progres-
sing time. The regeneration process lasts between 28 and 52 minutes
depending on the unit.
EN
45