BWT Rondomat Duo-DVGW 2 Einbau- Und Bedienungsanleitung Seite 42

EN
42
The Quick flush symbol changes to inverted colours.
Quick flushing the 1 softening column takes up to 2 or 3 minutes.
st
Repeat the process until the water flowing to the sewage connection is
clean and there are no bubbles.
Quick flushing is completed as soon as the inverted symbol disappears.
You can view any procedure as a diagram with progressing time by
pressing the Browse button twice.
Set the cursor to Manual
Press OK to confirm.
Changing the softening column
Set the cursor to Change column
Press OK to confirm.
The Column change symbol changes to inverted colours.
Column changes take 1 minute.
The column change is completed as soon as the inverted symbol
disappears.
Quick flushing the 2 softening column
nd
Set the cursor to Flush
and press OK
The Quick flush symbol changes to inverted colours.
Quick flushing the 2 softening column takes up to 2 or 3 minutes.
nd
Repeat the process until the water flowing to the sewage connection is
clean and there are no bubbles.
Quick flushing is completed as soon as the negative symbol disappears.
For Rondomat 6 und 10 only:
Each softening column must be flushed 4 times. I.e. Quick flushing
must be run 8 times.