Terraillon Thermo Smart Bedienungsanleitung Seite 20

CONNECTED NON-CONTACT THERMOMETER
CAUTION:
After press the measure button, the distance sensor will detect the distance
between the forehead and thermometer. If the distance is between 1- 5 cm, it
will directly test the forehead temperature.
If the distance is more than 5cm or less than 1cm, short successive beep
sounds will be issued indicating that the thermometer should be moved to
the forehead in 1- 5 cm. When the correct distance is reached a double beep
signals it.
If it is not the proper distance for forehead temperature, the thermometer will
measure ambient temperature.
CAUTION:
External factors may influence forehead temperature particularly when an
individual has:
- been exposed to very hot or very cold temperatures.
- been recently swimming or bathing.
- had their forehead covered.
In these cases, let the individual stay away from the above scenario and station
in a room for 30 minutes prior to talking a temperature.
OBJECTS OR LIQUID TEMPERATURE
To measure the temperature of the surface of an object or liquid,
put the thermometer in object mode.
• Place the thermometer in your hand as shown with your thumb
on the [measure] button
switches to room temperature mode
• Press the button
mode and display the screen opposite:
• Hold the thermometer and ensure the probe is around 0-5
cm from the liquid or surface whose temperature you want
to measure.
• Press the [measure] button
beep sounds signals the end of measurement. Remove the
thermometer from the object. The LCD displays the measured
temperature.
• To return to room temperature mode, press [M].
• The thermometer will automatically return back to standby mode and to body
temperature mode after 1 minute.
20 20
EN
the thermometer automatically
.
and [M] at the same time to enter object
to start the measurement. A
CH
• T
m
• T
s
fr
• P
d
The
Pre
the
MA
• C
• C
a
c
t