Iluminarc LOGIC MR16 Downlight S Schnellanleitung Seite 3

What is Included
• LΩGIC MR16 Downlight S
• Medium and wide filters
DC Power
This product is powered by the LΩGIC Drive 2X via the LΩGIC POE X with a CAT6 connection of 52 VDC. Download the
User Manual for the LΩGIC Drive 2X and the Quick Reference Guide for the LΩGIC POE X from
more details.
Power Linking
It is possible to link up to 8 LΩGIC MR16 Downlight S products from each output of the LΩGIC POE X. A POE injector
must be used to power products connected to the THRU port of the LΩGIC POE X.
Filters
The LΩGIC MR16 Downlight S has 2 filter slots.
• The inner filter slot fits the medium filter (pre-installed) or the wide filter (included).
• The outer filter slot fits the LΩGIC MR16 HF (Honeycomb Filter, sold separately by Iluminarc).
• To remove the installed filter, turn it until the keys on the edge line up with the openings in the slot.
• To install a filter in an empty slot, line up the keys on the edge with the openings in the slot and insert. Turn the
filter so the keys are secure.
Medium or wide filter (inner slot)
Turn the filter no more than 60° or it may not be secure.
Signal Linking
The LΩGIC MR16 Downlight S will receive a control signal (DMX, RDM, Art-Net™, or sACN) from the LΩGIC Drive 2X
via the LΩGIC POE X with a CAT6 connection.
Connecting and Cabling
The LΩGIC MR16 Downlight S has an IN port and an OUT port which require a CAT6 ethernet connection.
IN
LΩGIC MR16 Downlight S
LΩGIC MR16 Downlight S QRG Rev. 5
QUICK REFERENCE GUIDE
•
•
Key (x3)
LΩGIC MR16 HF (outer slot)
OUT
Hanging pendant bracket
Quick Reference Guide
LΩGIC Drive 2X
EN
www.iluminarc.com for
Key (x3)
LΩGIC POE X
2