Analysing Faults And Solutions - Argo X3 ECO PLUS Bedienungsanleitung

Has the air conditioner recently been
Sound of running
turned on or off?
water
Has the air conditioner recently been
turned on or off?
Creaking/cracking
noises

Analysing faults and solutions

Error codes
In the event of a fault, the temperature indicator on the indoor unit will flash to display the corresponding
error code. Refer to the following list to identify the error code.
Error code Faults and solutions
Can be eliminated by turning the unit off and on again.
E5
Otherwise, contact a qualified technician for assistance.
Can be eliminated by turning the unit off and on again.
U8
Otherwise, contact a qualified technician for assistance.
Can be eliminated by turning the unit off and on again.
E8
Otherwise, contact a qualified technician for assistance.
C5 Contact a qualified technician for assistance.
Contact a qualified technician for assistance.
F1
F2 Contact a qualified technician for assistance.
N.B.: In the event of other error codes, contact a qualified technician for assistance.
Warning
If you experience any of the following problems, turn the air conditioner off and immediately disconnect
the power. Then contact your local Technical Service Centre.
The power cable is damaged or has overheated.
The unit makes an unusual noise during operation.
The circuit breaker keeps tripping.
The air conditioner emits a burning smell.
The indoor unit is leaking.
Do not attempt to repair or reinstall the air conditioner yourself.
If the air conditioner is operated in abnormal conditions, malfunction, electric shock or fire may
result.
V 01/20
The noise is produced by the refrigerant
flowing inside the unit (normal
phenomenon).
It is the sound of the friction caused by
the expansion and/or contraction of the
panel or other parts due to temperature
changes.
79