Divator Pro Bc / Harness; Introduction; Safety Notice - INTERSPIRO Divator Pro Benutzerhandbuch

Introduction

This user manual contains important safety, maintenance, and operation
information. Read this manual thoroughly before diving.

Safety notice

This product, achieving neutral buoyancy for the user, has been tested in
accordance with EN1809, and is to be used according to local regulations.
Manufacturer: Interspiro AB, Box 2853 18728 Täby Sweden
It is approved for use together with the Interspiro Divator Pro regulator unit,
Divator full face mask / breathing valve, Divator DP1 surface supply system
and the range of Interspiro diving cylinders.
This is not a lifejacket: it does not guarantee a head up position of the wearer
at the surface.
Buoyancy: 190 N
Interspiro is not responsible for:
• combinations of products, unless put to market by Interspiro
• changes or adaptations made to the product by a third party
Declaration of conformity is found here:
https://interspiro.com/en-gb/service-support/downloads/certificates-approvals
Warning
Before using the Divator / OX10 / IS-Mix system, the user
must have received full training in its use, have read and
understood these operating instructions and demonstrated
proficiency to a responsible trainer or supervisor. Failure to
do so may result in injury or death for the user and can have
serious consequences for people to be rescued and/or items
of value to be saved.

Divator Pro BC / harness

7