Assembling The Cylinders On The Harness - INTERSPIRO Divator Pro Benutzerhandbuch

Assembling the cylinders on the harness

Make sure that the cylinders have sufficient pressure
1. Assemble the hoses for the reserve valve on the harness.
Make sure the cylinder valve connection and the high pressure connection
are free from water, particles or dirt.
Make sure that the O-ring in the high pressure connection is intact and
clean.
2. Assemble the cylinder pack on the harness. Use the hole as a guide to fit
the harness, check that the plug is in the center of the hole.
Tighten with the hand screw.
Divator Pro BC / harness
17