Inhaltsverzeichnis
Werbung
User's manual | EVO Lite
The EVO Lite is pre-equipped to use a speed-bar as most of our harness models are.
Within the SUP'AIR gear lineup, the standard speed-bar is the most adaptable for being the
lightest and self-retractable.
C
A
D
1
Elasticated
recoil cord.
5
Lines
A
Crimped hooks
B
Elasticated self-retractable speed-system
C
4
2
5
Elasticated recoil cord.
(D) shaped buckle.
3
Installing the speed-bar system.
E
Speed-bar cord.
F
Push the accelerator cord through the
1
guiding tube.
D
Push the speed-bar line through the pul-
2
ley.
Push the accelerator cord through the lat-
3
eral skirt slot.
E
Attach the end of the speed-bar lines to
4
the crimped hooks which is to be connect-
ed to the riser's crimped hooks. Adjust the
lines length and securely knot it.
Self-retracting speed-system: push the
5
elastic cords through the ( D ) ring to con-
nect them to the white loop stitched on the
inner sides of the harness.
If the foot rest is not used, the lateral skirt
6
can be folded over and around the guiding
tube and close by pressing the button.
SUPAIR
| EVO Lite | page 12
F
Werbung
Inhaltsverzeichnis
