FALMEC Quantum Pro Easy Gebrauchsanweisung Seite 23

SETTING AREAS
1 - 2
Melt
Heat
2 - 3
Whisk
Defrost
3 - 4 Steam
4 - 5
Boil
6 - 7 Cook over a low heat
7 - 8 Cook
Fry
9
Fry, bring to the boil
P
Fry, bring to the boil
Remark: heating time of cooktops is shorter than the gas cookers.
POWER CHANGE PROCEDURE
CAUTION: reducing power results in a limitation of the power le-
vels that can be set in individual areas. These limitations are auto-
matically managed by the device.
Sequence
3 sec.
2 3
1 4
Sauces, butter, chocolate,
gelatine
Precooked dishes
Rice, pudding and cooked
dishes
Vegetables, fish, frozen food
Vegetables, fish, meat
Boiled potatoes, soups, pasta
Fresh vegetables
Meat, liver, eggs, sausages
Goulash, rolate, tripe
Potatoes, donuts, cakes
Steaks, omelettes
Boil
Bring to the boil big
quantities of water
description
With the top switched off
Press the ON/OFF key
Within 3 seconds, press the ON/OFF
key again.
The key starts flashing
Press and hold the pause key
The cooking area displays show:
.
Press the four areas clockwise.
Release the pause key
The cooking area display shows the
symbol alternating with the
parameter number
The Timer area displays the current
setting of parameter
The parameter for setting the
power is U0.
Press the Timer area to change the
set power value.
Press the power level selector:
- left to decrease the value,
- right to increase it
Power Value
Minimum: 1.4 2.8kW
Maximum: 3.7 7.4kW
Adjustment increment: 0.2kW
Press to exit parameter
setting
Sequence
2 sec.
AUTOMATIC SWITCH-ON OF THE COOKING AREA
- Turn on the cooker top
- Place the saucepan, not empty, on the cooking area
- The key corresponding to the area is automatically switched on
- The power level selector switch is activated by illuminating level 0
0
- Press the key of the cooking area to be set. The bottom right-hand dot
lights up
- Adjust the desired power level.
POWER LEVEL ADJUSTMENT:
- Slide your finger to the right in the power level selector switch and stop at
the desired level.
0
- The display of the selected cooking area shows the set power level:
- Press the key to activate the booster level.
The display of the selected cooking area shows
The booster level is maintained for a maximum of 5 minutes, after which the
power level is raised to 9.
SWITCHING OFF THE COOKING AREA:
- Slide your finger to the left in the power level selector switch and stop at
level 0.
0
- The display of the selected cooking area shows the power level 0:
NOTE: all cooking areas can be switched off at the same time:
press key for 2 seconds..
On the display of the cooking areas that are still too hot, the symbol is
displayed . Do not touch the cooking areas as long as the lamp
is on.
23
description
To save changes and exit the menu:
- press the ON/OFF key
for 2 seconds.
To exit the menu without saving
changes:
- press the key
9
9
-->
.
9