Packaging - Abicor Binzel ABIPLAS CUT 71 HF Betriebsanleitung

®
ABIPLAS CUT HF
12 Disposal
12.1 Materials
This product is mainly made of metallic materials, which can be melted in steel and iron works
and are thus almost infinitely recyclable. The plastic materials used are labelled in preparation
for their sorting and separation for later recycling.
12.2 Consumables
Oil, greases and cleaning agents must not contaminate the ground or enter the sewage system.
These substances must be stored, transported and disposed of in suitable containers.
Please observe the relevant local regulations and disposal instructions in the safety data sheets
specified by the manufacturer of the consumables. Contaminated cleaning tools (brushes, rags,
etc.) must also be disposed of in accordance with the information provided by the
consumables' manufacturer.

12.3 Packaging

ABICOR BINZEL has reduced the transport packaging to the necessary minimum. The ability
to recycle packaging materials is always considered during their selection.
BAL.0716.0 • 2022-01-11
Equipment marked with this symbol is covered by European Directive
2012/19/EU on waste electrical and electronic equipment (WEEE).
• Electrical and electronic equipment must not be disposed of with
household waste.
• Electrical and electronic equipment must be collected separately and
recycled in an environmentally friendly manner.
• Please observe the local regulations, laws, provisions, standards and
guidelines.
• Your local authority can provide you with information about the
collection and return of electrical and electronic equipment.
• To dispose of the product correctly, it must first be disassembled.
12 Disposal
EN - 31