Abicor Binzel ABIPLAS CUT 71 HF Betriebsanleitung Seite 37

®
ABIPLAS CUT HF
®
ABIPLAS CUT
Soft start air [l/min]
Gas post flow time [s]
Selection of the plasma
nozzle
Tab. 3
Product-specific torch data (EN 60974-7)
Standard values for cutting capacity
The specifications on the cutting capacity are standard values only as they are also greatly
affected by the following factors:
• Type and quality of the material
• Compressed air pressure and impurities
• Temperature of the workpiece to be cut
• Desired cutting quality
• Condition of the electrode and the cutting nozzle
• Distance and position of the cutting torch from/in relation to the workpiece
• Power source characteristics
• Cutting speed
®
ABIPLAS CUT
Material thickness [mm]
Steel
Stainless steel
Aluminium
Tab. 4
Standard values for cutting capacity
BAL.0716.0 • 2022-01-11
71 HF
71 HF MT
≥ 12
0.9 mm / to 30 A
1.1 mm / 30–60 A
1.2 mm / 50–70 A
1.1 mm long/max. 50 A 1.2 mm long/max. 50 A 1.2 mm long/max. 50 A
71 HF
71 HF MT
20 (max. 25) at 70 A
13 (max. 15) at 50 A
18 (max. 25) at 70 A
13 (max. 15) at 50 A
15 (max. 20) at 70 A
8 (max. 10) at 50 A
111 HF
111 HF MT
≥ 15
≥ 60
1.0 mm / 30–50 A
1.2 mm / 40–70 A
1.4 mm / 70–90 A
1.6 mm / 90–110 A
2.6 mm for gouging
111 HF
111 HF MT
35 (max. 40) at 110 A
30 (max. 35) at 90 A
30 (max. 35) at 110 A
25 (max. 30) at 90 A
25 (max. 30) at 110 A
20 (max. 25) at 90 A
3 Product description
151 HF
151 HF MT
≥ 15
1.2 mm / to 70 A
1.5 mm / 70–90 A
1.6 mm / 90–120 A
1.8 mm / 120–150 A
3.0 mm for gouging
151 HF
151 HF MT
50 (max. 55) at 150 A
35 (max. 45) at 120 A
40 (max. 45) at 150 A
30 (max. 40) at 120 A
35 (max. 40) at 150 A
25 (max. 35) at 120 A
EN - 7