Abicor Binzel ABIPLAS CUT 71 HF Betriebsanleitung Seite 32

EN Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operating instructions as become necessary due to misprints, inaccuracies
or product enhancements. Such changes will, however, be incorporated into subsequent editions of
the operating instructions.
All brand names and trademarks that appear in these operating instructions are the property of their
respective owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com
1 Identification
1.1 Marking
2 Safety
2.1 Designated use
2.2 Obligations of the operator
2.3 Personal protective
equipment (PPE)
2.4 Classification of the warnings
2.5 Special warnings for operation
2.6 Emergency information
3 Product description
3.1 Technical data
3.2 Nameplate
3.3 Signs and symbols used
4 Scope of delivery
4.1 Transport
4.2 Storage
5 Functional description
6 Putting into operation
6.1 Setting up the
®
ABIPLAS CUT HF manual
cutting torch
6.1.1 Cutting torch body
6.1.2 Handle
6.2 Setting up the
®
ABIPLAS CUT HF MT
machine cutting torch
6.2.1 Machine torch body
6.2.2 Cable assembly
6.2.3 Accessories
EN - 2
7
EN-3
7.1
EN-3
7.2
EN-3
EN-3 7.2.1 Compressed air as plasma
EN-3
7.2.2 Filtered compressed air free of
EN-4
EN-4 7.3
EN-4 7.4
EN-5
7.5
EN-5 7.5.1 Trigger guard
EN-5 7.5.2 Safety device
EN-8 7.6
EN-8 7.7
8
EN-9
EN-9
9
EN-9
9.1
EN-10 9.2
EN-11 10
11
EN-11
EN-11 12
EN-11 12.1
12.2
12.3
EN-12
EN-12
EN-12
EN-12
ABIPLAS
Operation
Setting up the torch body
Connecting the plasma
cutting torch
and cooling gas
oil and water
Connecting the machine torch
Plasma cutting torch with
central connector
Before switching on
Igniting the torch
Cutting process
Putting out of operation
Maintenance and cleaning EN-27
Cable assembly
Cutting torch
Troubleshooting
Disassembly
Disposal
Materials
Consumables
Packaging
BAL.0716.0 • 2022-01-11
®
CUT HF
EN-14
EN-14
EN-23
EN-23
EN-24
EN-24
EN-24
EN-25
EN-25
EN-25
EN-25
EN-26
EN-26
EN-27
EN-28
EN-28
EN-30
EN-31
EN-31
EN-31
EN-31