Emergency Information; Product Description; Technical Data - Abicor Binzel ABIPLAS CUT 71 HF Betriebsanleitung

®
ABIPLAS CUT HF

2.6 Emergency information

In the event of an emergency, immediately disconnect the following supplies:
• Electrical power supply
• Compressed-air supply
Further measures can be found in the operating instructions for the power source or the
documentation for other peripheral devices.

3 Product description

WARNING
Hazards caused by improper use
If improperly used, the device can present risks to persons, animals and material property.
• Use the device according to its designated use only.
• Do not convert and modify the device to enhance its performance without authorization.
• Only qualified personnel are permitted to perform work on the device or system.

3.1 Technical data

Cutting
Transport and storage
Relative humidity
Tab. 1
BAL.0716.0 • 2022-01-11
Ambient conditions during operation
3 Product description
−10 °C to +40 °C
−25 °C to +55 °C
Up to 90% at 20 °C
EN - 5