Electrical Connection - Whirlpool WT 1090 BA Bedienungsanleitung

ELECTRICAL CONNECTION

Electrical connection must be made before connecting the appliance to the electricity supply, check that the voltage and frequency match those
specified on the stovetop nameplate, which is underneath it, and on the Guarantee Sheet, or if applicable on the technical data sheet, which you
must keep together with this manual throughout the product's service life. Ensure that the inlet cable does not come into contact with the induction
top housing or the oven housing, if it is installed in the same unit.
The electrical connection must be properly grounded, following current legislation, otherwise the induction hob may malfunction.
Installation must be carried out by qualified personnel who know the current safety and installation regulations. Specifically, installation must be
carried out in compliance with the regulations of the local electricity supply company. Only the official technical service can handle or repair the
appliance, including replacement of the power cable.
Make sure the voltage specified on the data plate located on the bottom of the appliance is the same as that of the home.
Regulations require that the appliance be earthed: use conductors (including the earth conductor) of the appropriate size only.
Warning:
Unusually high power surges can damage the control system (like with any electrical appliance).
It is advised to refrain from using the induction hob during the pyrolytic cleaning function in the case of pyrolytic ovens, due to the high
temperature that this type of device attains.
Before disconnecting the hob from the mains, we recommend switching off the cutoff switch and waiting for approximately 25 seconds before
disconnecting from the mains. This time is required to allow for the complete discharge of the electronic circuitry and thus preclude the possibility
of electric shock from the cable terminals.
Keep the Guarantee Certificate or the technical data sheet together with the instructions manual throughout the product's service life. These contain
important technical information.